Replica Audemars Piguet

Audemars Piguet blog

January 12, 2020

JH Factory Replica Audemars Piguet Royal Oak Chronograph 26331 with Asia 7750.

Audemars Piguet Royal Oak Chronograph 26331

We have already known that JH factory has another name that is OM and they have started to make Audemars Piguet replica watches since 2019. In the past, JH only made some Audemars Piguet Royal Oak classic models like 15400, but now they have extended their business to Royal Oak Chronograph filed. Today, I will give a short review on the following replica Audemars Piguet Royal Oak Chrono watch, which is made of stainless steel and features a black dial.

Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331

In my previous posts, I said that the best Audemars Piguet replica watches are made by J12 factory, whether the basic Royal Oak 15400, or Royal Oak Tourbillon, or Royal Oak Offshore, the best replicas belong to J12, we have to admit this, however, these replicas from J12 also have very expensive prices, even the basic Royal Oak is sold at more than $780 usd. So, those Audemars Piguet replica watches from JH factory give us a very affordable option.

Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331

The watch has a stainless steel case and bracelet, it is sold made. The brushed case finish is highly contrasting with the octagonal bezel that is polished. There are chronograph buttons on the right case, you can operate them like you did on a genuine Royal Oak Chronograph watch, when you push the button at 2 o’clock down, the central big second hand will start to work, however, this replica watch does not have a full chronograph function, I mean the 30-minute chronograph counter and 12-hour chronograph counter at 3 and 9 o’clock with no function. The only working subdial is the small seconds positioned at 6 o’clock. I do not know why JH factory did not give it a full chronograph function, actually they can achieve the function easily.

Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331

Besides the big fault chronograph display, the dial of the replica is made very accurate. Especially the date window, it is very close to genuine and not like most other Audemars Piguet replica watches, it is not recessed at all. By the way, like Audemars Piguet replica watches from J12 factory, this AP replica watch from JH factory also has correct and strong green lume color.

Audemars Piguet Royal Oak Chronograph 26331

Overall, if you want to buy one replica Audemars Piguet watch with high grade case finish and perfect clasp engravings, please go with J12 products, if you do not have enough budget and want an affordable replica AP, please order from JH(OM) factory.

Audemars Piguet Royal Oak Chronograph Stainless Steel Collection:

Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331

Audemars Piguet Royal Oak Chronograph Rose Gold Collection:

Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331Audemars Piguet Royal Oak Chronograph 26331

 Audemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton Watch Review

Replica Audemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton Watch Review.

Audemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton Watch

Every man wants to own one mechanical watch, once they have it, then a higher goal will appear, maybe for a chronograph watch or other complications. After the born of mechanical watch, tourbillon is always the focused object among our watch fans, each brand has their own iconic tourbillon watch model. Now, tourbillon even becomes the pursuit of many watch buyers for the highest quality mechanical watch.

Audemars Piguet Royal Oak Tourbillon Extra-Thin SkeletonAudemars Piguet Royal Oak Tourbillon Extra-Thin SkeletonAudemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton

In replica watches market, the most popular tourbillon watches come from Audemars Piguet and Richard Mille, the two sports brands, while the tourbillon watches made by them are highly welcomed in replica watch field. I introduced one Royal Oak Tourbillon watch from R8 factory before, and this post received a lot attention, many buyers asked me its price. Today, I will introduce another Audemars Piguet Royal Oak tourbillon replica watch, compared with previous ones, this watch is completely an art work.

Audemars Piguet Royal Oak Tourbillon Extra-Thin SkeletonAudemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton

First, this replica Audemars Piguet is not coming from J12 watch factory, do not trust some websites saying that this tourbillon watch is made by J12. Although it is a tourbillon, the watch still has a extra thin case, which is measured to be only in 12mm, very close to the case thickness of genuine watch.

The dial is completely skeletonized, except the most outer inner bezel that marks hour markers and minute scales, the other part of the dial is skeleton, you can see supports, the working tourbillon device and other machine parts. In the past, I did not like complication watch with such a skeleton dial, but nowadays, I think this exactly reflects the advanced watch-making technology of the factory.

Audemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton

It is a real tourbillon watch, the factory installs a manual winding flying tourbillon movement in this watch, you just need to wind the watch one time each day, about 20-30 rotations. Actually I think in all mechanical watches, the tourbillon watch has the fewest chance to have technical issues, the tourbillon watch can also work very accurate, that’s why a lot of men want to own one tourbillon watch.

Audemars Piguet Royal Oak Tourbillon Extra-Thin SkeletonAudemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton

Due to the high complicated skeleton dial and tourbillon movement, the replica watch is sold at a very expensive price. Let us expect that J12 will make this tourbillon watch in future. Most of people who really want to get one tourbillon watch do not want to pay a bit more money.

Audemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton

Audemars Piguet Millenary 15350 with 4101 Movement

V9 Factory Replica Audemars Piguet Millenary 15350 with Clone 4101 Movement.

Millenary is a dark horse among all Audemars Piguet models, it is not that popular Audemars Piguet famous Royal Oak and Royal Oak Offshore, I almost forgot that Audemars Piguet has ever had this series, and I do not know what kind of person is willing to buy such a watch – Millenary. What purpose Audemars Piguet makes this watch for? Does anyone know?

V9 is a new factory in replica watch field, at the beginning, it makes some Submariner models, now I still do not know why they make this ugly watch, do you guys like this Millenary? Maybe none of men want to buy an Audemars Piguet Millenary watch. However, this oval-shaped watch is a great timepiece for women.

Oval-shaped watch is very rare, I only see it in Millenary collection of Audemars Piguet. The uniqueness of this watch not only lies in its case design, which is oval-shaped, but also the dial, one half is displaying machine part of movement, one half is displaying time. The dial is skeleton, on the left, you can see the golden balance bridge, on the right half, there are two small dials, the smaller one is displaying small seconds, while the bigger one shows hours and minutes. Two dials are MOP and the bigger one uses Rome markers.

From the crystal back, the auto rotor is also placed on one side, it is in golden tone and has beautiful decoration. The Geneve Stripes on the base plate are also clear. To make such an oval-shaped case that looks as accurate as genuine, V9 factory has made a great effort.

The replica watch is sold more than $780 usd, first, it is a big expensive for me. If I were you, I will not buy it, or would rather paying a bit more to buy a replica Audemars Piguet RO Diver 15703 from J12 factory. What about your opinion on this Millenary watch?

Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement.Audemars Piguet Millenary 15350 with Clone 4101 Movement. Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement

J12 Factory Replica Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with Super Clone 3126 Movement.

 Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement

Now, Audemars Piguet is my dream watch, I like its strong and robust appearance. Among all Swiss watch brands, Audemars Piguet should have one position among the best-selling sports watches, its famous Royal Oak should also be one of the most successful sports models in recent ten years. Under such strong outlook, its quality is also strong, Audemars Piguet Royal Oak is also the favorite of many sports stars, under the Royal Oak Offshore collection, there are many limited edition models which Audemars Piguet published for sports stars like LeBron James, Lionel Messi, Michael Schumacher, etc. Today, I want to show you a great replica watch of Audemars Piguet, the genuine watch was published in 2017, this replica is made by famous J12 factory, which makes the best replica Audemars Piguet in our market.

 Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement

It is a ceramic watch. I mean both case and bezel are made of black ceramic. So the whole watch is very heavy due to the solid ceramic material. 44mm ceramic case is measured to be 16mm in thickness, so I think this watch with such a large case is not suitable for every one, just like Panerai for Stallone, you must have a large wrist so that can control the watch. Look at the construction of the entire middle case, it is like a sandwiched structure. The polishing face on the edge of bezel is highly contrasting with the brushed case side. Like genuine watch, the case back is titanium made.

 Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement

Black dial has the same size of checkers as genuine AP. The blue color usage on hour and minute chronograph hands as well as central seconds chronograph hand is eye-catching, it also highlights the whole black dial and makes the watch look less dull. Date window is set at 3 o’clock, the date font is just set in the right center of the window, and in correct font size. Because the small seconds subdial is set at 12 o’clock, so, not like before, the dial will not be a big fake spot, it becomes more and more accurate, some could even be interchanged with genuine watch.

 Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement

Installed with a super clone 3126 movement inside, the replica is closer to genuine watch even it has a see-through case back. Together with the 3120 movement in Royal Oak, both movements are super clones of J12, they costed J12 factory a lot of efforts and time to develop these two movements. Now, no other watch manufacturers are able to clone AP 3120 and 3126, they do not need to do, because they can not compete with J12.

 Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with 3126 Movement

Because J12 factory’s absolute dominance in this replica Audemars Piguet watches, it is worth to spend more money with this factory to buy a good quality AP replica watch.

OM Factory Replica Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap

OM Factory Replica Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.

Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.

Royal Oak is the hottest model in our market, various factories have replicated many models of Royal Oak, especially 15400. Among so many manufacturers, J12 is the one that makes the best replica Audemars Piguet Royal Oak watches. I have introduced the replicas of Royal Oak 15400 here, one is made by OM factory and has a black dial, the other is made by J12 factory and has a blue dial. Both are in good quality. Compared the two 15400 replica watches from OM and J12, I still think that the one made by J12 has a better quality. But why do I still introduce the OM 15400 to you guys? Because it is much cheaper.

Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.

This Roayl Oak 15400 replica is made of 316F stainless steel and has 18K rose gold plating on the case, which is measured to be 41mm in diameter and only 10.7mm thick. The latest V5 edition of 15400 from J12 factory is also 10.7mm in case thickness. The case is brushed, there are eight screws on the bezel in matt finish, classic octagonal bezel has smooth edge that is polished. Seeing the case from side, it is straightforward, only the lugs have somewhat mechanical curvature.

Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.

The dial is in black and has delicate checkers decoration. Hands and hour markers have rose gold edge, while their center is filled with white luminescence. Central second hand works smoothly crossing the round dial.

Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.

Both 15400 from OM and J12 use Asia clone 3120 movement that is based on a genuine Japanese Miyota 9015. Actually the clone 3120 was firstly developed by J12 factory, so, maybe the clone 3120 installed in J12 15400 is more stable.

Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.

Compared the two 15400 from OM and J12 factory, OM only has the price advantage, because it is tens of dollars cheaper than the one of J12. So I still suggest you buy the 15400 replica from J12, after all, the latest edtion of 15400 from J12 is V5 now, after so many improvements, the case finish and dial details have come to be perfect.

Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap.

Anyway, if you want to buy the 15400 from OM, the factory will also offer you one pair of free rubber strap.

Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch

R8 Factory Replica Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.

Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.

Royal Oak is one of the most popular sports watches in recent ten years, it is just like the Big Bang for Hublot, both are highly welcomed by people who love sports watches. In the past several years, Royal Oak has published a lot of classic models, 15400 is one of them, it is very hot and has also become the hot object of various factories to replicate. Besides the basic models, Royal Oak also has the watch with complicated functions such as tourbillon. I wrote an article about the replica Audemars Piguet Royal Oak Tourbillon watch made by R8 factory before, it is a great replica with high quality finish and real tourbillon movement, after several reponses from my clients, I decided to introduce another good quality tourbillon watch from this factory, different from the previous white stainless steel model, this Audemars Piguet Royal Oak Tourbillon has a full black appearance, which not only looks cool but also like a black knight.

Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.

The watch has a full black outlook, actually it is made of 316F stainless steel and then being fully plated with black PVD. 41mm case is brushed, seeing the case from sides, we can see obvious edges and corners, which make the case full of mechanical beauty. Although the case of Royal Oak is not that large as Big Bang of Hublot, it looks much stronger. The bezel is brushed on the front, while the round edge is polished, you can find the hierarchical processing on the case from the sides. All screws on the bezel are white stainless steel.

Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.

The dial of the replica Audemars Piguet watch is very unique. It is not the common checkered dial on most Royal Oak models, the checkers on this Audemars Piguet Royal Oak Tourbillon watch have different sizes and they are radial. The most important part on the dial is the big window opened at 6 o’clock, it is the tourbillon device, the openning window is big. To guarantee a high stability, the tourbillon movement has several supports fixed on the dial. Both hour markers and hands have silver edge and are filled with white luminescence in the center.

Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.

The movement inside is a genuine tourbillon, which is manual winding, you need to wind the watch every day, and better to wind it before going to bed every night to gain enough power, so that the watch could still work accurate till next morning. If you are not a crazy fan of Audemars Piguet tourbillon watch, plus its special black PVD coating on it, I do not recommend you buy this replica watch, because it has a very expensive price.

Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap

Noob 1:1 Best Replica Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.

Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.

Royal Oak Offshore Survivor is the biggest Audemars Piguet watch I have ever seen. Its extremely large pusher protector is the biggest feature of Survivor. The watch looks cool and fantasy, the most striking chronograph pusher protector makes it to be the watch I want to wear even do not know whether I like it or not. Genuine Audemars Piguet Royal Oak Offshore Survivor is limited to 1,000 pieces, now it has already been sold out. If you still want to own one, the only way is to buy a replica. Today, I am going to introduce such a high quality Audemars Piguet Survivor replica watch, which is made by Noob factory. Please note, if you want the best quality replica of this Audemars Piguet watch, you must buy this one, the one made by Noob factory, because other factories like J12 did not make this watch. The only high end version is made by Noob.

Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.

Like genuine, the case is blackened titanium, Noob used black DLC coating on the titanium case. The case is up to 44mm in diameter, this even does not include the size of crown and chronograph pusher protectors. There are cutout holes on the left case surface, grooved bezel is made of black ceramic and fixed by Titanium screws. The entire case and bezel are fine brushed, on the right case side, crown and chronograph pushers all have special protectors.

Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.

Black dial has a tachymeter scale like genuine. The segmented hands are the second striking visual feature of this Audemars Piguet Survivor watch. Small seconds subdial is positioned at 12 o’clock, the small seconds hand has a red end. 30-minute chronograph counter and 12-hour chronograph counter are positioned at 9 o’clock and 6 o’clock separately. To increase the entire readability of the dial, the hands and markers on two chronograph counters are in white, which is highly contrasting with the black background. Every black stick hour marker has one luminous dot, the central segmented hour and minute hands are also applied with luminous material.

Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.

Noob used a black leather band on this replica watch, while they also offer one pair of black rubber straps for free. Besides, the watch will also come with Audemars Piguet sports wrist bands.

Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap.

 Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial

OM Factory Replica Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.

Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.

In recent years, maybe Royal Oak is the most popular sports watch. Due to its very unique shape, the watch could be easily recognized just at a glance. Royal Oak is the most famous series of Audemars Piguet, it has basic and complications such as chronograph, tourbillon and perpetual calendar. Among these models, the one we love most is Royal Oak 15400, which is also the model that has been mostly replicated in our market. I have introduced a replica of Royal Oak 15400 before, it is made by J12 factory, yes, I admit that their replica AP Royal Oak 15400 is the best version in the market, several weeks ago, J12 updated the 15400 to latest V5 edition. With the high popularity of Royal Oak 15400 in watch market, there are other factories that are replicating it except J12. Yes, OM is one of these factories, it also makes good quality 15400 replica like this one. And the price is much lower than J12 factory’s.

Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.

I have two purposes to introduce this 15400 to you. First, if you want a good quality Royal Oak 15400 replica at less than $750 usd, then buy it from OM factory. Second, compared the best version from J12 factory, OMF 15400 has a better bracelet quality, the end links on the bracelet are better.

Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.

The stainless steel case is 41mm in diameter, it is brushed on front face, while on both sides, the case is polished. Bezel is fixed by screws at the eight corners of the octagon. The edge of the bezel is polished. Check crown on the right side, the “AP” engraving is sand finished. Case back is with a sapphire crystal porthole on the center, the back side of the four lugs is micro-sanded, which is contrasting with the brushed finish of the case back.

Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.

The dial has four color options for you to choose, black, white, grey and blue. Most people choose black and blue. But the white and grey are also very classic. The checkered dial was the hard point to be cloned in the past, now after researching and upgradation of watch-making technology, the checkered dial on 15400 could be made 99% the same as genuine, whether the Royal Oak 15400 made by J12 or OMF, the checker dial will not become a fake spot.

Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.

The bracelet is absolutely a selling point, I have to admit J12 does better polishing on the bracelet of their 15400, but on this OMF version, the shape and length of bracelet are closer to genuine. Fitted with a deployant clasp that has correct engravings. At last, please read the specification.

Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Blue Dial.

Movement: Asia Clone AP 3120, Based on Genuine Japanese Miyota 9015 Automatic.
Case: 41mm*10.7mm, 316F Stainless Steel
Bezel: 316F Stainless Steel
Crystal: Sapphire with AR Coating
Dial: Black, White, Grey and Blue Options, Checkered Dial with Lumed Hour Markers and Hands
Bracelet: Solid 316F Stainless Steel with Deployant Clasp
Water Resistant: 50m

Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial.Audemars Piguet Royal Oak 15400 with Clone 3120 Movement white Dial.

Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial



R8 Factory 1:1 Ultimate Replica Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial.

Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

I never heard off R8 factory before, maybe it is a small factory that is not as popular as Noob, BP and J12. However, R8 is one of the few factories that make tourbillon replica watches in our market. Sometimes it is better to buy a tourbillon watch, not only because of its high accuracy, but also the tourbillon device has fewer repairing rate. About five years ago, there are few tourbillon replica watches because of limited watch-making technology, nowadays, most watch fans have a higher requirement in replica watches, they are more willing to buy replica watches with advanced specification, so a lot of factories started to improve their watch-making technology and use tourbillon device, R8 is one of them. This Royal Oak Tourbillon watch is a novelty presented by Audemars Piguet several years ago, in our market, it has been replicated by more than three factories. Here I will introduce the one by R8F.

Audemars Piguet Royal Oak Tourbillon 26510 with Blue DialAudemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

Powered by a tourbillon movement, the replica watch uses a real tourbillon movement made by Sea-Gull, which is the most famous watch company in China and also has a good reputation in the world’s watch industry. The movement is not modified by the factory, so it is the original Seagull tourbillon, which is very stable, I mean this one is the most high end tourbillon replica watch in the entire market. By the way, this tourbillon movement is hand winding. Check it through the crystal back, the movement plate has a nice decoration.

Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

Reinforced case is measured to be 41mm in diameter, it is brushed featuring an octagonal bezel with polished edge. Check the case from side, it does not look thick, the case is only 12.4mm in thickness. Like genuine watch, both bezel and case back are screwed down into the middle case, the polygonal crown on the right case is very easy for you to rotate to wind and adjust hands.

Audemars Piguet Royal Oak Tourbillon 26510 with Blue DialAudemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

The bracelet is crafted from solid 316L stainless steel, it is brushed and slender, so it won’t feel very heavy when wearing the watch on hand. The clasp id deployant, it has the same structure as genuine watch, you just need a light press to unfold it. It is also very easy for you to remove this stainless steel bracelet and change another pair of leather band. Finally, please check the basic specification of the replica.

Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

Movement: Real Seagull Tourbillon, Hand Winding
Case: 316L Stainless Steel, 41mm*12.4mm
Bezel:Brushed, with Polished Screws
Crystal: Sapphire with AR Coating
Dial: Blue Checkered Dial, Working Tourbillon Device Shown at 6 o’clock, Balance Bridge Fixed on The Dial
Bracelet: Solid 316L Stainless Steel, Deployant Clasp with Correct Structure and Engravings
Water Resistant: 50m

Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

Audemars Piguet Royal Oak Dual Time 26120 (2329 Movement)

TWA Factory Replica Audemars Piguet Royal Oak Dual Time 26120 with Clone 2329 Movement.

Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.

There are a lot of top quality replica Audemars Piguet watches in our market, some people always asked me which one is the best, actually every replica watch has their advantages and disadvantages, they are not perfect. However, in my mind, there are three pieces which I think are the best, if you want buy one replica Audemars Piguet watch, you can consider one of them. They are Royal Oak 15400, Royal Oak Diver 15703 and Royal Oak 15202. These three watches are all made by J12 factory. Today, I want to show you a very unique Audemars Piguet watch coming from TWA factory. The watch has several practical functions such as date, second-time zone, power reserve, it is very convenient for the user who usually travels around the world.

Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.

The Audemars Piguet Dual Time 26120 replica maintains the distinctive case shape of Royal Oak with octagonal bezel. The case is brushed, it is measured to be 41mm in diameter. The octagonal bezel has a polished edge with eight screws decorated on the face. The whole case uses the same construction as genuine watch, between the middle case and bezel, there is black rubber gasket, which is one part of the waterproofing system. Case back is solid stainless steel, it has “Royal Oak” in bright silver tone, in the sandblasted center background.

Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.

The most eye-catching place of the replica watch lies in its dial, which is black. Royal Oak’s classic checkered dial has a fan-shaped power indicator between 8 o’clock and 11 o’clock. The date is displayed on a subdial positioned at 2 o’clock. At 6 o’clock, it is the second time zone display, on the left side, there is a day and night indicator with a small red index. Anyway, the replica has all functions which you can find on its genuine watch. Besides, the dial has increased amount of Swiss lume material applied on stick hour markers and hands.

Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.

This watch is a moderate quality replica from TWA factory, maybe its case and bracelet finish are not as good as that of AP replicas from J12 factory, but they are already good enough, besides, the replica is sold at much cheaper price than those AP made by J12. I do not know whether J12 factory will make this replica or not, maybe we still need to wait for several months.

Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.Audemars Piguet Royal Oak Dual Time 26120 - 2329 Movement.

Audemars Piguet Royal Oak Perpetual Calendar 26574 with Clone 5134 Movement

J12 Factory Replica Audemars Piguet Royal Oak Perpetual Calendar 26574 with Clone 5134 Movement.

Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.

Royal Oak is one of the best-selling sports watches in the world. It is highly recognizable due to its octagonal bezel shape. Many of us think that Royal Oak only has some simple models, other complicated models are in Royal Oak Offshore and Jules Audemars series, actually they are wrong. We admit that Royal Oak produces the most simple and popular 15400 watch, but it also has some complicated models like this one I am going to introduce here. It is Royal Oak 26574 with a lot of functions, including date, week, month and moon phase. The watch that has so many functions is hard to be cloned, but J12 factory completed this hard work and brought this novelty to us.

Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.

26574 is a Royal Oak watch that is fully made of stainless steel. The case is 41mm in diameter, its thickness is no more than 13mm. The entire case is brushed, there are eight polished screws in brushed bezel, to ensure a good water resistance, J12 factory refers to the case waterproofing system of genuine watch, so whether the case or crown construction, they tried their best effort to make it 1:1 original. On the left case, there is one button, there are two buttons up and below the crown on the right case side, I did not operate these three buttons, so I do not know which function will be adjusted when you push one of them.

Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.

The dial is textured blue, there are four small dials with each displaying different function. Each subdial has Guilloche decoration. The subdial at 3 o’clock with a red digit “31” is displaying current date. The moon phase is displayed at 6 o’clock. Week is displayed on the subdial at 9 o’clock. There are two subdials at 12 o’clock, the outer big one is for month display, I do not know the function of the one inlaid. Hour markers, hour and minute hands have Super-LumiNova coating applied.

Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.

The movement, which you can see from crystal back, is highly decorated. The main base plate has beautiful Geneva Stripes, we also call these fish scales. Auto rotor is skeletonized and in golden tone, this is the first time for J12 factory to clone the genuine 5134 movement of Audemars Piguet. We expect more improvement could be made by J12 on thie clone 5134.

Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.

This Audemars Piguet replica watch is very convenient, you can know exact month, date and week just by a glance, without the need to taking out your mobile phone.

Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.Audemars Piguet Royal Oak Perpetual Calendar 26574 -5134 Movement.

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch with Clone 3120

J12 Factory 1:1 Ultimate Replica Audemars Piguet Royal Oak Diver 15707 Ceramic Watch with Clone 3120

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120

Nowadays in watch industry, Audemars Piguet has beaten many Swiss watch brands such as Breitling, Bell Ross and Tag Heuer, it has become a flagship brand among all Swiss sports watches. The big case and octagonal bezel are two big features of Audemars Piguet, you can notice this big watch at a glance. Royal Oak is the most popular sports series of Audemars Piguet, it is also very famous among all sports watches. The Royal Oak Diver is very new to us, it was just a new series published by Audemars Piguet several years ago. Now Royal Oak Diver has a lot of popular models such as 15703, 15710 and 15707. These models are also hot targets in replica watch industry, they have been replicated by a lot of factories, among them, I think J12 makes the best replica Audemars Piguet Diver watches. First, the case finish which J12 factory does in all Audemars Piguet replica watches is the best, this has been proven by the professionals in watch forums. Seconds, J12 is the factory that firstly developed Asia 3120 movement and installed their Audemars Piguet, now this movement researched two years ago has been improved by J12 for several times, so, the accuracy and stability are much better now. Third, about Audemars Piguet Diver watches, especially 15703 and 15707, J12 factory has upgraded their details for more than three times, now, this final edition is an ultimate 1:1 replica, if you have read my previous post about the Diver 15703, you will know how good the JF Audemars RO Diver is.

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120

The 42mm case plus its octagonal bezel looks big, however, the case is not thick, it is only 12mm. The entire case and bezel are made of black ceramic, the brushing finish on the case is the same as that of genuine watch. There are eight stainless steel screws fixed on the bezel, look at care carefully, its edge is finely processed, which feels very smooth. The whole case is full of angularity and mechanical beauty, especially its case side. The crown has delicate “AP” engraving in sandblasted finish.

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120

Black checkered dial has every detail that is made very close to genuine dial. The black dial has a very good readability, not only because of the Swiss lume material applied on hour markers hands, but also the orange color on inner bezel rehaut and minute hand increases readability. The lume on the dial is very strong and long lasting. Central second hand is very unique, the orange lume dot and tip are very attractive.

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120

 

Crystal case back shows the movement clearly. Now this Super Clone 3120 is the third generation of 3120 from J12 factory. The decoration on the golden auto rotor is upgraded, the sculpture on the rotor is 1:1 cloned from genuine AP 3120. While on the movement plates, there are golden engravings, the jewels have a correct tone. The mechanism of this Super Clone 3120 is genuine Miyota 9015, so the stability of the movement could be guaranteed.

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120

Now, the review is done, let’s check the full specification of the replica watch.

Movement: Super Clone 3120 Based on Japanese Miyota 9015 Automatic, Platinum Plated Movement Plates and Decorated Auto Rotor, Currently The Best Clone 3120
Case: 42mm*12mm, Black Ceramic
Bezel: Imported Balck Ceramic Material
Crystal: Sapphire with Colorless AR Coating
Dial: Black Checkered Dial with Super Green Lume on Markers and Hands
Bracelet: Black Rubber Strap with Tang Buckle
Water Resistant: 50m

Audemars Piguet Royal Oak Diver 15707 Ceramic Watch 3120

Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement

J12 Factory Replica Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.

Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.

Now SIHH 2019 is very close, I have not seen any new models coming from Audemars Piguet, hope they can bring us several great timepieces during this watch exibition. So watch manufacturers in our market can replicate them and present in front of you in time. Now in replica watches industry, the market share of replica Audemars Piguet is completely occupied by one factory, that is J12. Whether in outlook finish or inside mechanism, the Audemars Piguet replica watches made by J12 factory are the best. The  they made is even the best-selling replica watch, even the Submariner 116610LN from Noob can not compare with it. Today, I will show you another popular replica Audemars Piguet watch from J12, it is a Royal Oak Offshore Chrono model, the watch is a combination of several watch materials that include rose gold, ceramic and rubber. The Audemars Piguet watch is very big and looks robust, not every one can control such a big watch. So, if you feel confident and can hold this watch, please read the next article and contact me if interested.

Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.

The case is 44mm in diameter, which has not include the crown and chronograph buttons on the right. The case is fully made of solid 316L stainless steel and plated with 18K rose gold, which is measured to be 5 mils thick. The rose gold is not only plated on case, it is also on the crown guards, crown cap and case back. While the screws on case and case back are in stainless steel. The bezel is characterized with Audemars Piguet Royal Oak’s octagon, it uses black ceramic that contrasts with the rose gold case. The whole case is made of three pieces like genuine, they are bezel, middle case and case back, these three pieces are assembled by skilled watch master from J12 factory, so the case has a good water resistant performance.

Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.

Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.

Thanks to its brushed surface, the case is highly scratch resistant. The whole case uses solid stainless steel and ceramic, so you will feel very heavy when wearing the watch. Not like that light

Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.

Black dial is checkered, which is a common feature for almost every Audemars Piguet Royal Oak watch. J12 factory has improved the dial details for several times, now this black dial is very close to genuine. First, all three subdials are sunken on the main dial and have a correct depth. Second, the date font is upgraded, now it has a correct font thickness and has been set in the center of the date window. That’s the two big improvements on this Audemars Piguet replica watch. Look at the subdials, each has a rose gold circle, like the rose gold edge on hour markers and hands. The rose gold color on the dial is exactly in line with the rose gold tone on case. Small seconds hand is running on the subdial at 12 o’clock. Other two subdials are for minute and hour chronograph display. In a word, this is a replica with a fully working chronograph.

Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.

The band on this Audemars Piguet is made of black rubber, the rubber strap has the same width and length as that on genuine watch. The rubber band is made of Thai natural rubber material, it has a strong tensile strength and will not be brokean easily. Besides, the rubber strap is waterproof, after taking a dive with this watch, it will still have a great wearing comfort, not like leather strap, once being soaked, it will be wet and not comfortable to wear.

Audemars Piguet Royal Oak Offshore Chrono Rose Gold with Black Ceramic Bezel A3126 Movement.

The finish of the replica is perfect ten, the movement also has a very close outlook to genuine AP Cal. 3126. You can not find a perfect replica Audemars Piguet from other factories. While the price is bit expensive, if you have not made a preparation to purchase it, why not consider other Audemars Piguet replica watches from this factory, for example, the AP RO Diver 15703, AP Royal Oak 15400, their quality is also very good.

Audemars Piguet ROO Dark Knight 26470 3126

JF V2 Edition Replica Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

Audemars Piguet is one of the best-selling sports watches in Swiss watch industry, and Royal Oak is their most popular series due to its iconic octagonal bezel. In our market, there are a lot of replica Audemars Piguet watches from different factories, the best replicas that look closest to genuines belong to AP RO 15400 and ROO Diver 15703. However, other models, especially those ROO Chrono watches, are also replicated so well today. In the past, maybe three or four years ago, a lot of Audemars Piguet Royal Oak Offshore replica watches made in our market can not achieve a correct chronograph function, the small seconds subdial was not set at 12 o’clock like genuine. In recent two years, J12 brought us the best Audemars Piguet replica watches, they not only upgraded the case finish to a new high level, but also developed Clone AP 3126 movement. Now, Audemars Piguet replica watches have become the flagship products of J12 products. After seeing such perfect replica AP watches from J12 factory, other factories felt the pressure of competition, they also improved the finish of their products and released enhanced editions. So, there is one trend in our market in 2019, that is the quality of replica watches will become better, and you need to pay more to get one.

Audemars Piguet ROO Dark Knight 26470 with Clone 3126.Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

The Audemars Piguet Dark Knight replica has a big case, including the polygonal bezel. The case is 42mm in diameter and 16mm thick. The case surface is brushed, which is more similar to satin finish, the edge of case is brightly polished, you can appreciate the case finish on its right side, the lugs and crown guards have sharp corners and edges, which are processed so well, so they won’t hurt your hand. Once I see the beautiful case design and finish, I will never consider Audemars Piguet as a timer, it is completely an art work full of mechanical sense. Bezel uses high quality black ceramic with stainless steel screws. The bezel face is vertically brushed, which is different from the satin finish on case. Display case back uses a sapphire crystal on the center, there are eight screws on case back edge to fix it to the middle case.

Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

The dial is black, with checkered squares in same size as genuine AP. Arabic numeral hour markers, hour hand and minute hand are applied lume material, the whole dial will be clearly readable under any condition. The V2 edition of replica Audemars Piguet updated the date font, which has been modified to correct thickness, the date font is also centered in the window, not too left or too right. The replica uses a clone 3126 movement with a fully working chronograph function. Now on the dial, you can see the small dial at 12 o’clock in whole white color is displaying small seconds, chronograph minute counter is set at 9 o’clock, chronograph hour counter is set at 12 o’clock, both small hands are in bright red color. The central long hand in red is for seconds chronograph. You can start, stop or reset the chronograph function by pressing the two buttons at 2 and 4, by the way, the two chronograph buttons on the right case are made of ceramic, not rubber.

Audemars Piguet ROO Dark Knight 26470 with Clone 3126.Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

Besides high quality finish on case and best clone 3120 movement, there is also another point that highlights the whole watch, that is the rubber band. The edge of the black rubber band has the same red color as central second-chronograph hand and two small hands. It is exactly the red color on the band that changes the monotonous black outlook. The brushed buckle features “AP” engraving in perfect sand-blasting finish.

Audemars Piguet ROO Dark Knight 26470 with Clone 3126.Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

This Audemars Piguet replica watch from J12 is sold at an expensive price, which maybe beyond your affordability. However, sometimes it is cost-effective for you to buy one high quality replica watch that will last for several years, instead of paying hundreds of dollars for several pieces of replicas that easily broken.

Audemars Piguet ROO Dark Knight 26470 with Clone 3126.

Audemars Piguet ROO Diver 15703 3120 Movement Black Rubber Strap

J12 Factory V9.5 Edition Replica Audemars Piguet ROO Diver 15703 with Clone 3120 Movement Black Rubber Strap.

Audemars Piguet ROO Diver 15703 3120 Movement Black Rubber Strap

When talking about Swiss watch brands, Audemars Piguet is one of the few advanced independent watch manufacturers in the whole Swiss watch industry, each piece of Audemars Piguet watch is produced and assembled in their own precision watch factory, their watch-making civilization and technology have been perfectly passed down. When I first saw Audemars Piguet, I was deeply impressed by its case design, especially the octagonal steel bezel. The watch also feels very heavy because of its solid steel case and bezel in large size, overall, the whole watch exudes a masculine temperament, it is a very ideal timepiece for men. Today, the watch I am going to introduce here is a replica Audemars Piguet, when you see these photos below, do you believe that it is a replica watch? I can not even believe my eyes, a replica could be done so perfect. What flaws can you find from this replica? No matter what, I can’t. This replica is made by J12 factory, we also call it JF. This Audemars Piguet Diver 15703 replica is the newest V9.5 edition from J12 factory, every detail has been imitated perfect ten in this replica. You know, J12 claims that they make the second-best Audemars Piguet watches, absolutely the best one is original.

Audemars Piguet ROO Diver 15703 3120 Movement Black Rubber Strap

J12 has been improving this Audemars Piguet Diver replica since 2016. How many scores you will give it after reading this review? We are waiting for your comments.

Audemars Piguet ROO Diver 15703 3120 Movement Black Rubber Strap

Before J12, the best quality replica 15703 Diver is made by Noob factory, but later J12 upgraded the case finish and movement, they completely defeated Noob. Look at the finish on this replica, the front of the case and bezel is brushed, but check the edge of the bezel, it has two different processing, polishing on top and brushing on bottom, I never saw such meticulous finish on a replica watch before. The metal part that connects case and rubber band is sandblasted that is different from brushed case. The case edge is polished so smooth and round, so you will never get any scratch feeling when wearing the watch on hand. The case back is solid, so I wonder this is also one of the reasons why this Audemars Piguet Diver replica is so popular. The center of the case back is sandblasted and white gold plated, the relief “Royal Oak Offshore” is perfectly imitated.

Audemars Piguet ROO Diver 15703 3120 Movement Black Rubber StrapAudemars Piguet ROO Diver 15703 3120 Movement Black Rubber Strap

Black checkered dial has a neat layout and the lume on hour markers and hands is strong and long lasting. All hour markers and hands have silver edge, while the center is fully filled with white luminescence. Because of the strong case and bezel as well as thick sapphire crystal, the watch has a super watch resistant performance, the crystal fits the bezel perfectly so the water will never penetrate into. Audemars Piguet Diver 15703 has a classic diving-style dial that looks so simple but practical, it could be an example for other diving watch brand.

Audemars Piguet ROO Diver 15703 3120 Movement Black Rubber Strap

Movement: Super Clone AP 3120 Based on Asia ETA 2824-2 Automatic, 28800BPH, Decorated Auto Rotor and Movement Plates, The Movement Has a Perfect Stability, Work for You More Than Three Years
Case: 42mm*13.8mm, Solid 316L Stainless Steel, Brushed
Bezel: Brushed Octagonal Bezel with Eight Screws Fixed, There is Black Rubber Between Bezel and Middle Case to Prevent Water Penetration
Crystal: Sapphire with Swiss Grade AR Coating, Colorless
Dial: Black Checkered Dial, Green Superlumed Markers and Hands, Date Window at 3:00
Bracelet: Black Rubber Band Made with Malaysian Natural Rubber Material, Soft and Waterproof, Comfortable
Clasp: Pin Buckle with Exquisite Engraved “AP” Word on Buckle
Water Resistant: 100m

Audemars Piguet ROO Diver 15703 3120 Movement Black Rubber StrapAudemars Piguet ROO Diver 15703 3120 Movement Black Rubber Strap

Audemars Piguet Royal Oak Offshore 26400 Combat Green Camouflage Watch

J12 Factory V2 Edition Replica Audemars Piguet Royal Oak Offshore 26400 Combat Green Camouflage Watch.

Audemars Piguet Royal Oak Offshore 26400 Combat Green Camouflage

I never saw an Audemars Piguet watch uses such colorful design before. In our eyes, Audemars Piguet is big, solid, heavy and specially designed for tough guys, here this Audemars Piguet uses green camouflage design, which makes the watch look more tough. Not everyone can have an Audemars Piguet Royal Oak Offshore under control, the octagonal bezel makes the large case look bigger, if your wrist is thin, I suggest you do not try such a watch, unless you buy it to defend yourself. J12 now has become a big factory, Noob makes the best replica Rolex, ZF makes good quality IWC replicas, VS makes the best Panerai replicas, while J12 Audemars Piguet replica watches are considered to be the best quality in the market. This Audemars Piguet Royal Oak Offshore 26400 replica is the V2 edition from J12, it has several places improved, which include bezel finish, case back engravings and also comes with a free green rubber band. If you usually go for outdoor hiking with your friends, then this Audemars Piguet replica watch with camouflage design will be a better timepiece to match your sports shoes and clothes.

Audemars Piguet Royal Oak Offshore 26400 Combat Green CamouflageAudemars Piguet Royal Oak Offshore 26400 Combat Green CamouflageAudemars Piguet Royal Oak Offshore 26400 Combat Green Camouflage

Once you see the case finish, do you still think that this is a replica watch, and made by a Chinese factory? It is indeed a replica, but the case has the same construction as genuine, and the finish is superior to Audemars Piguet replicas made by any other watch factories. The case is 44mm in diameter, but that does not include crown and chronograph buttons. I am very impressed with the case finish, especially its edge and corner, which are smoothly polished. Bezel is green ceramic that is brushed, it is fixed with eight screws in stainless steel. On the right side of the case, there are four octagonal screws to fix two crown guards on the case. Each screw used in the replica could be interchanged with that of genuine watch. Please check the crown, it has a stainless steel cap with satin-finished “AP” on the front. Case back has a see-through sapphire crystal on the center, there are engravings of “ROYAL OAK OFFSHORE” on the edge, eight screws fix the back, please touch the back side of these lugs and crown guards, their sandblasting finish feels high textured.

Audemars Piguet Royal Oak Offshore 26400 Combat Green CamouflageAudemars Piguet Royal Oak Offshore 26400 Combat Green Camouflage

Cream checkered dial has three subdials in black with white markers, small seconds hand is running on the subdial at 12 o’clock, the subdial at 6 o’clock is used as 12-hour chronograph counter, while the subdial at 9 o’clock is used as 30-minute chronograph counter, the latter two subdials have small hands in orange color. The long and slim hand in the center is for seconds chronograph, when you press down the button at 2 o’clock, this hand will move and the chronograph starts, when you press the 2:00 button again, the chronograph stops, once the 4:00 button is pressed, the hand will be back to 12 o’clock. So this replica watch has the exactly same chronograph function as genuine AP. Date is displayed in the window positioned at 3 o’clock, white date font in black background. On the left side of the date window, there is an exquisite “AP” logo in three-dimensional, below the logo, there are black printings “AUDEMARS PIGUET”.

Audemars Piguet Royal Oak Offshore 26400 Combat Green Camouflage

The replica is equipped with a camouflage green rubber diver’s band, the green color is in line with the green ceramic bezel. About movement, it uses an Asian Valjoux 7750 Secs@12 chronograph as a base movement, which has been modified to look of genuine AP Cal.3126. You can see the movement parts clearly through crystal back, the movement is beautiful and has correct decoration, especially these golden seals, they are 1:1 cloned according to genuine.

Audemars Piguet Royal Oak Offshore 26400 Combat Green Camouflage

The Audemars Piguet 26400 camouflage watch has a design that completely meets its “Combat” theme, if you have been looking for a brand watch in camouflage style, why not try this Audemars Piguet.

Audemars Piguet Royal Oak Offshore 26400 Combat Green CamouflageAudemars Piguet Royal Oak Offshore 26400 Combat Green CamouflageAudemars Piguet Royal Oak Offshore 26400 Combat Green CamouflageAudemars Piguet Royal Oak Offshore 26400 Combat Green Camouflage

Audemars Piguet Diver 15706 Forged Carbon Watch with 3120 Movement

XF V2 Edition Replica Audemars Piguet Diver 15706 Forged Carbon Watch with Super Clone 3120 Movement.

Audemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 Movement

Audemars Piguet Royal Oak is the most masculine watch, it has a case with obvious edges and clear lines, octagonal bezel is fixed by eight screws, each detail is very tempting for me. If you had experience in buying replica watches, you will know that J12 factory makes the best replica Audemars Piguet watches, but after the release of this Audemars Piguet Diver 15706 replica by XF, I changed my opinion, the factory that could be able to challenge J12’s dominance appeared, that is XF. After reading my review, you will know my saying is right. XF is not a new factory, actually it has been very familiar to us, it was previous KW or V6 factory. I do not know why they changed their factory name in 2018. Now, let’s back to this replica watch, it is the latest V2 edition of Audemars Piguet Diver 15706, every detail has reached to be a perfect replicating level.

Audemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 Movement

The case is completely made of forged carbon, take a closer look at the case, it has special carbon patterns, and the forged carbon case makes this big watch feel light when wearing. Bezel is made of high grade black ceramic, the replica watch has a very high-level case construction, which is the same as genuine watch. Between the case and bezel, there is one gasket made of black rubber to guarantee better water resistance. The surface of the black ceramic bezel is brushed and feels high quality textured. However, the case finish still has not reached to the level of J12 AP replicas. On the solid case back, central relief “Royal Oak Offshore” is polished in sandblasting background.

Audemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 Movement

Black dial is checkered, there are stick hour markers in white, hour markers and Arabic numerals on the beveled inner bezel are applied Swiss Superlume material. The dial will have a strong green lume light in the dark. Minute hand and the tip of the central second hand are in yellow color, which is in line with the yellow inner diving bezel. The dial has a great finish, date window is positioned at 3 o’clock, white date font is centered in the window and has the same font size and thickness as genuine AP 15706.

Audemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 Movement

Compared with J12 AP 15706, the biggest advantage of XF replica AP 15706 is that it is equipped with a Swiss ETA 2836 movement. I mean this replica uses a genuine Swiss ETA movement, the factory modified the auto rotor and movement plates so that it looks like AP 3120 Caliber. XF made this clone 3120 movement on basis of a genuine ETA 2836, so the movement will work more accurate and stable. The following are details of the replica. By the way, the factory also offers one pair of XS black and yellow rubber strap for this watch.

Audemars Piguet Diver 15706 Forged Carbon Watch with 3120 Movement

Movement: Modified AP 3120 Caliber on Basis of Genuine Swiss ETA 2836-2 Automatic, 28800BPH
Case: 42mm*12mm, Solid Forged Carbon
Bezel: Black Ceramic
Crystal: Sapphire with Colorless AR Coating
Dial: Black with Superlumed Hour Markers and Hands
Bracelet: Black Rubber Strap with Tang Buckle
Water Resistant: 50m

Audemars Piguet Diver 15706 Forged Carbon Watch with 3120 MovementAudemars Piguet Diver 15706 Forged Carbon Watch with 3120 Movement

Audemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel Bracelet

J12 Factory Replica Audemars Piguet Royal Oak 15400 Clone 3120 Movement Blue Dial with Stainless Steel Bracelet.

Audemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel Bracelet

Audemars Piguet Royal Oak 15400 is very popular among our watch fans, it has several models in different dial colors, such as black, white, grey and blue. The watch could also be equipped with stainless steel bracelet or black rubber strap. As a basic sports series of Audemars Piguet, Royal Oak is loved due to its simple design but with practical functions. 15400 is the most favorite of many people because of its classic look. Although it is a sports model, the watch is more used in a lot of formal occasions, it perfectly matches with your casual or business suits. Today, I will show you one replica Audemars Piguet Royal Oak 15400, it is made by J12, which is a great manufacturer who has earned a lot of reputation for making the best Audemars Piguet replicas. This Audemars Piguet Royal Oak 15400 replica is fully made of solid 316L stainless steel, which looks like a big tough tank. Wearing such a stainless steel Audemars Piguet watch will show your mens charm to the maximum.

Audemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel Bracelet

The case is newly produced accordin to the case profile of genuine watch, the factory abandoned the case that was used on previous versions of 15400, this one was replicated independently. Now the case on this V3 replica Audemars Piguet 15400 is completely the same as genuine, whether in diameter or thickness. Octagonal bezel is most able to reflect the case finish level, its surface is brushed and each side is polished, every corner is well polished so that there will be no metal burrs. When you touch the bezel with your hands, it feels very smooth. To get a better water resistance, there is a waterproof washer between the bezel and case, so that they can fit together tightly. Case and lugs are forged into one piece, it looks like the lugs are extended parts of the case. Check the “AP” engraving on crown, it is matt finished and has a correct depth. Case back is fixed by one-word screws, with one see-through crystal on the center.

Audemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel Bracelet

J12 is the first factory that installed clone 3120 automatic movement in their Audemars Piguet Royal Oak replica watches. This 15400 is also equipped with a clone AP 3120 movement that has been improved by J12 for several times. The clone 3120 is actually based on a Japanese Miyota 9015, J12 chose this Japanese movement to modify because it has the same stability and accuracy as genuine Swiss ETA movement. After the release of clone 3120 and being installed in their AP replicas, the test result is that the movement has a very low repairing rate. I love the crystal back, it lets me to appreciate the beauty of the movement closely.

Audemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel BraceletAudemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel Bracelet

Dial is blue and it also has grey, white and black color options. Blue and black are my favorites. Stick hour markers have a very similar shape to hour and minute hands, they all have silver edge and are applied superlumed material on the center. Central seconds hand is slender and works smoothly, without jumping seconds. The classic tapisserie dial patterns on this replica could not be 100% the same as genuine, but you can not tell the difference if you do not have a genuine watch in hand. Date window is small and at 3 o’clock, it features a blue edge and white font in blue background.

Audemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel Bracelet

 

There are a lot of Audemars Piguet replica watches in good quality, but if you want to buy your first replica and have an interest in Audemars Piguet, then 15400 could be your entry-level replica watch. Royal Oak 15400 is currently the best replica Audemars Piguet and sold at a much cheaper price than other Audemars Piguet Chronograph watches, you also do not need to worry of sending it back for repairing because the replica itself has a high stability, if you can do a regular care on the watch, it could run accurately for about five years.

Audemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel BraceletAudemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel Bracelet

Audemars Piguet Royal Oak 15400 - 3120 Movement Blue Dial with Stainless Steel Bracelet



Leave a comment

Comments will be approved before showing up.


Also in Blog posts

Replica Richard Mille
Richard Mille blog

April 03, 2020

Read More

replica patek philippe geneve
Patek Philippe blog

January 12, 2020

Read More

replica omega planet ocean
Omega blog

January 12, 2020

Read More